HomeSectorsPlastics & chemicals

SECTORS / PLASTICS & CHEMICALS

Alongside the result, the process conditions.

Review batch and sample relationships with production parameters. Use the record to follow what the same numerical result means under different process conditions.

Open the sample quality demo Book a demo discussion

This sector workflow is an illustrative scenario. Product fields, test methods and limits are separately mapped to your own control plan.

Sample product
Polymer specimen
Checks
Density and tensile strength
Sample report
Batch specimen assessment form
Pilot preparation
Specimen preparation method, test conditions and your batch assessment form.
q.QualityCore / Web demoSample data
ACTIVE SAMPLE PRODUCTPolymer specimenDEMO-POL-001
STEP 01 / 04

Start with a product.

DEMO-POL-001
POL—07
SAMPLE PRODUCT

Polymer specimen

Density and tensile strength

LOT
DEMO-POL-001
Report
Batch specimen assessment form

Select a sector, enter two sample measurements and create your report. No account is needed for this workflow.

Sample scenario · Limits are illustrative · No production record is created
01

Match the batch and sample

Define the production batch, sample code, collection time and product details. Specify the sample preparation method in the test plan.

02

Record the parameters

Keep necessary temperature and process information alongside the test result. Each parameter’s unit and acceptance range must agree with the relevant method.

03

Evaluate the change

Review results requiring attention in their production context. Leave additional sampling or retest decisions to the authorised team’s assessment.

Record and Process Parameters

Sample recordP07 sample record
RelationshipBatch → Sample → Test
ContextTemperature and process conditions
OutputBatch assessment report

Setup & Preparation Requirements

  • Sample sampling plan
  • Tracked process parameters
  • Units and report templates used
Is a production parameter the same as a quality result?

No. A process parameter can explain a result’s context; it does not by itself mean product acceptance. Acceptance criteria are defined separately in the test plan.