HomeSectorsAutomotive

SECTORS / AUTOMOTIVE

From part to batch, a clear inspection trail.

Handle supplier incoming inspection, in-process measurements and batch assessment through the same LOT relationship. Start with a fastener’s sample workflow.

Open the sample quality demo Book a demo discussion

This sector workflow is an illustrative scenario. Product fields, test methods and limits are separately mapped to your own control plan.

Sample product
M12 fastener
Checks
Torque and dimensional checks
Sample report
Fastener inspection form
Pilot preparation
Technical drawing, part control plan and anonymised supplier report.
q.QualityCore / Web demoSample data
ACTIVE SAMPLE PRODUCTM12 fastenerDEMO-AUTO-001
STEP 01 / 04

Start with a product.

DEMO-AUTO-001
AUTO—12
SAMPLE PRODUCT

M12 fastener

Torque and dimensional checks

LOT
DEMO-AUTO-001
Report
Fastener inspection form

Select a sector, enter two sample measurements and create your report. No account is needed for this workflow.

Sample scenario · Limits are illustrative · No production record is created
01

Define the control plan

Bring together product code, drawing revision, supplier batch and sample information. The authorised team defines the characteristics to inspect and their acceptance ranges.

02

Review the result in context

Link dimensional and tensile test results to the relevant sample. For an out-of-limit measurement, assess the instrument, method and sampling scope together.

03

Link the batch decision to the record

Connect deviation explanations and the action plan to the report. Acceptance, further review and other batch decisions belong to the organisation’s authorised team.

Record and Process Parameters

Sample productM12 fastener
Relationship to followSupplier batch → Internal LOT → Sample
CheckDimensional and tensile tests
OutputLOT report and review status

Setup & Preparation Requirements

  • A product’s control plan
  • Anonymised supplier report
  • Sample and batch coding arrangements
Does every part use the same control plan?

No. Inspection fields, methods and limits are evaluated by product family and technical revision. This scenario is illustrative; compliance with automotive requirements is verified separately.